COURSE SCHEDULE
| Code | Date | Location | price (€)* |
|---|---|---|---|
| AIM 101 | 8 - 12 Mar 2027 | Online | 3300 |
| AIM 101 | 5 - 9 Jul 2027 | Online | 3300 |
| AIM 101 | 8 - 12 Feb 2027 | Bangkok | 4400 |
| AIM 101 | 11 - 15 Oct 2027 | Kuala Lumpur | 4400 |
COURSE OVERVIEW
This practical course provides participants with a comprehensive understanding of greenhouse-gas and methane emissions management for offshore oil and gas facilities. It examines how emissions are identified, quantified, controlled, reduced and documented throughout the operating life of an offshore asset. Participants will examine the principal offshore emissions sources, including combustion, flaring, venting, fugitive emissions and process emissions, and learn how operating practices, maintenance, equipment selection and capital projects can be used to reduce emissions while maintaining safe and reliable production. The course uses practical examples, exercises and case studies to connect emissions measurement and reporting with day-to-day operating decisions, engineering improvements and continuous performance improvement.
The course begins by examining the sources and drivers of offshore emissions and establishing an initial emissions estimate. Participants then consider flaring and venting, methane and fugitive emissions, emissions measurement and methods for improving the quality of emissions data. Attention then turns to practical reduction opportunities through improved operating practices, maintenance, equipment selection and vendor engagement. Participants learn how to justify and priorities reduction opportunities, maintain credible documentation, establish clear ownership across operations, maintenance and engineering teams, and embed emissions performance into continuous-improvement processes.
The later part of the course examines non-project and capital-project reduction opportunities, project governance, baselining, Management of Change, verification of reductions and engagement with environmental regulators. Practical examples and exercises are used throughout to reinforce application to offshore operating facilities.
In summary, participants will become familiar with:
- Offshore greenhouse-gas and methane emissions sources
- Emissions inventories and initial estimates
- Flaring, venting and fugitive emissions
- Measurement and improved quantification
- Operational and maintenance reduction opportunities
- Low-emission equipment and vendor technologies
- Business-case development and prioritization
- Documentation, traceability and emissions KPIs
- Cross-disciplinary emissions ownership
- Non-project and capital-project reductions
- Verification and continuous improvement
Regulatory reporting and engagement
COURSE OUTLINE
5 days
Day 1: Offshore Emissions Sources, Baseline Assessment and Flaring
- Offshore emissions sources and management drivers
- Combustion, flaring, venting, fugitive and process emissions
- Establishing an initial emissions estimate
- Understanding emissions inventories and activity data
- Why offshore facilities are flared
- Routine, operational and safety-related flaring
- Methane versus carbon-dioxide implications
- Initial opportunities for flare and vent reduction
Day 2: Improving Quantification, Operations and Maintenance
- Improving emissions-data quality
- Measurement versus estimation
- Selecting appropriate measurement approaches
- Data validation and reconciliation
- Operational improvements for combustion, flaring, venting and fugitives
- Start-up, shutdown and operating-condition effects
- Maintenance-related emissions
- Passing valves, compressor seals and equipment leakage
- Integrating emissions considerations into maintenance activities
Day 3: Technology, Vendors and the Business Case for Reduction
- Working with vendors and technology suppliers
- Low-emission valves, seals, packing and equipment
- Evaluating proposed emissions-reduction technologies
- Comparing alternatives and avoiding overstated benefits
- Developing and defending the emissions-reduction business case
- Cost, reliability, safety and emissions considerations
- Sharing non-sensitive operating experience
- Capturing lessons learned
- Embedding continuous learning into operating and maintenance practices
Day 4: Operational Control, Documentation and Organizational Ownership
- Low-cost and non-project emissions reductions
- Procedural changes to reduce flaring and venting
- Start-up, shutdown and depressurization improvements
- Making emissions visible through KPIs and dashboards
- Supervisor and operational accountability
- Documentation and calculation traceability
- Emissions inventories, source registers and P&ID alignment
- Cross-disciplinary collaboration between operations, maintenance and engineering
- Establishing clear ownership for emissions performance
Day 5: Reduction Projects, Verification and Regulatory Engagement
- Identifying and developing emissions-reduction projects
- Typical offshore projects including flare-gas recovery, vapour recovery, seal upgrades, electrification and waste-heat recovery
- Project lifecycle and stage-gate development
- Management of Change and process-safety considerations
- CAPEX, OPEX, payback and cost per tonne of CO₂ avoided
- Establishing a credible emissions baseline
- Verification of achieved reductions
- Reassessment and continuous improvement
- Working effectively with environmental regulators
- Responding to audit findings and regulatory observations
- Integrated course review and development of practical next actions
INSTRUCTOR
Instructor Profile
Instructor is a practicing chemical/process engineer with 45 years of industry experience and more than 20 years of professional technical-training experience. His career has focused primarily on oil and gas process and facilities engineering, including the design, operation, troubleshooting and optimization of gas-processing facilities, pipelines and associated production infrastructure. He has worked for major owner/operators including Amoco and BP and for international engineering contractor Fluor, providing experience from both operating-company and engineering-design perspectives. His technical experience includes separation, compression, pumping, gas processing and conditioning, refrigeration, heat exchange, process control, pipelines, metering, water treatment, commissioning, troubleshooting and debottlenecking. Instructor’s training approach is strongly practical and application-focused, drawing extensively on operating experience, engineering examples and case studies.
FAQ
DESIGNED FOR
The course is designed for operations, production, process, facilities and instrumentation engineers; maintenance and reliability personnel; operations-support teams; environmental and HSE specialists; supervisors and managers; and other technical personnel involved in managing emissions from offshore oil and gas facilities. It is particularly suitable for personnel who need to understand both the technical sources of emissions and the practical actions required to measure, reduce, document and manage them.
COURSE LEVEL
- Intermediate
LEARNING OBJECTIVES
After completing this course, participants will be able to:
- Identify the principal sources of greenhouse-gas and methane emissions from offshore oil and gas facilities.
- Develop and improve an emissions inventory using appropriate operating data, measurement and estimation methods.
- Explain the causes and operational implications of combustion, flaring, venting and fugitive emissions.
- Identify practical operational and maintenance actions that can reduce emissions without compromising process safety or production reliability.
- Evaluate equipment and technology options for methane and emissions reduction.
- Develop technically and economically justified emissions-reduction opportunities.
- Establish documentation, traceability and performance indicators that support defensible emissions reporting.
- Recognize the importance of cross-disciplinary ownership and continuous improvement in emissions management.
- Apply a structured approach to emissions-reduction projects, including baselining, Management of Change and post-implementation verification.
- Understand the expectations of environmental regulators and the importance of accurate, timely and transparent reporting.
REGISTER
Registration is now OPEN!
Ph.D. students, group and early bird registrants are eligible to DISCOUNT!
For more details and registration please send email to: register@petro-teach.com
REQUEST IN HOUSE
Would you like a PetroTeach training course delivered at a time or location to suit you?
click for request in house