preloader

PEE 104

Pumps, Compressors and Drivers

Pumps, Compressors and Drivers (PEE 119) — industrial rotating equipment

COURSE SCHEDULE

Code Date Location price (€)*
PEE 104 19 - 23 Apr 2027 Online 3300
PEE 104 15 - 19 Nov 2027 Online 3300
PEE 104 12 - 16 Jul 2027 Bangkok 4400
PEE 104 8 - 12 Nov 2027 Stavanger 4400

COURSE OVERVIEW

This intensive, practical five-day course examines pump and compressor systems used in oil and gas facilities, with emphasis on the engineering and operating decisions that affect equipment selection, installation, performance, control, reliability and troubleshooting. The course begins with liquid behaviour, hydraulics and pump-system fundamentals before progressing through centrifugal and positive-displacement pumps. It then develops the gas-property and thermodynamic foundations required to understand reciprocating, rotary and centrifugal compressors, including compressor performance, operating envelopes, control and anti-surge protection. Participants also examine the principal drivers used with pumps and compressors, including electric motors, internal-combustion engines and gas turbines, together with the factors affecting driver selection.

The emphasis throughout is on understanding the complete system rather than treating the pump or compressor as an isolated machine. Worked calculations, performance curves, practical operating examples and troubleshooting discussions are used to show how fluid properties, process conditions, piping, controls and drivers interact.

The course develops from liquid behaviour, hydraulics and centrifugal-pump fundamentals into positive-displacement pumps and the gas properties required to understand compressor behaviour. Participants then examine centrifugal compressors, performance maps, compressor controls and the effect of changing process conditions.

The later sessions address the principal drivers used with pumps and compressors, including electric motors, internal-combustion engines and gas turbines, before bringing the equipment, driver, piping, control system and operating conditions together as an integrated system.

Throughout the course, participants are encouraged to distinguish between equipment problems and process problems, recognise how apparently small changes in operating conditions can alter machine performance, and apply practical troubleshooting methods to real operating situations.

Participants will become familiar with the following:

  • Liquid properties and pump-system hydraulics
  • Centrifugal and positive-displacement pumps
  • Pump curves, system curves and operating points
  • NPSH and cavitation
  • Pump selection and application
  • Gas properties and compressor fundamentals
  • Reciprocating, rotary and centrifugal compressors
  • Compressor performance maps and operating envelopes
  • Compressor control and anti-surge protection
  • Effects of process conditions on compressor performance
  • Electric motors, engines and gas turbines
  • Driver selection
  • System integration, equipment selection and troubleshooting

COURSE OUTLINE

5 days
Day 1: Liquid Behaviour, Hydraulics and Centrifugal Pumps
  • Relationship between pumps, liquids and the piping system
  • Density, relative density, viscosity, temperature and vapour pressure
  • Flowrate, area and velocity relationships
  • Pressure, velocity and elevation as forms of hydraulic energy
  • Difference between pressure and head
  • Hydraulic power and equipment efficiency
  • Cavitation and vapour lock
  • Net Positive Suction Head: NPSHA and NPSHR
  • Practical methods for improving pump suction conditions
  • Centrifugal-pump operating principles
  • Radial, mixed-flow and axial-flow pumps
  • Vertical, in-line and multistage arrangements
  • Major pump components
  • Pump curves and system curves
  • Determining the operating point
  • Effects of impeller diameter and operating speed
  • Series and parallel pump operation
  • Best-efficiency-point considerations
  • Pump selection, installation and piping considerations
  • Operating problems, maintenance considerations and troubleshooting
Day 2: Positive-Displacement Pumps and Compressor Fundamentals
  • Positive-displacement pumping principles
  • Pump displacement, slip and efficiency
  • Reciprocating piston, plunger and diaphragm pumps
  • Rotary gear, lobe, vane and screw pumps
  • Flow characteristics and pressure capability
  • Pump application and selection considerations
  • Pulsation and vibration
  • Blocked-discharge and overpressure risks
  • Installation, maintenance and troubleshooting
  • Differences between pumping liquids and compressing gases
  • Gas pressure, temperature, density and enthalpy
  • Thermodynamic behaviour of gases
  • Compressor terminology and classification
  • Positive-displacement versus dynamic compressors
  • Reciprocating-compressor operating principles
  • Cylinders, valves, clearance and rod load
  • Rotary screw, lobe, liquid-ring and sliding-vane compressors
  • Compressor lubrication and auxiliary systems
  • Compressor application and initial selection considerations
Day 3: Centrifugal Compressors, Controls and Process Effects
  • Centrifugal-compressor operating principles
  • Major compressor components
  • Compressor trains, stages and casing arrangements
  • Intercooling
  • Compressor performance maps
  • Head and capacity relationships
  • Effects of suction conditions and gas properties
  • Series and parallel compressor operation
  • Surge
  • Choke or stonewall
  • Compressor operating envelope
  • Installation, piping and operating considerations
  • Objectives of compressor control and protection
  • Discharge-throttle and suction-throttle control
  • Speed control
  • Inlet-guide-vane control
  • Recycle control
  • Anti-surge protection
  • Surge line, control line and safety margin
  • Control-system and valve response
  • Effects of suction pressure and temperature
  • Effects of gas density and molecular properties
  • Relationships between pressure, temperature, enthalpy and compressor power
  • Worked compressor-performance calculations
  • Troubleshooting changing compressor performance
  • Course review and practical improvement planning
Day 4: Pump and Compressor Drivers
  • Role of the driver in a rotating-equipment system
  • Electric-motor operating principles
  • AC and DC motors
  • Three-phase induction and synchronous motors
  • Speed, slip and torque
  • Motor starting requirements
  • Variable-frequency drives
  • Motor-performance and selection considerations
  • Internal-combustion engine operating principles
  • Spark-ignition and compression-ignition engines
  • Two-stroke and four-stroke engines
  • Naturally aspirated, supercharged and turbocharged engines
  • Intercooling and available power
  • Engine installation and maintenance considerations
  • Gas-turbine operating principles
  • Major gas-turbine sections
  • Generation of shaft power
  • Gas-turbine operating and performance considerations
  • Auxiliary systems and protection
  • Efficiency and environmental considerations
  • Driver reliability and maintenance
Day 5: Driver Selection, System Integration and Troubleshooting
  • Selecting between electric motors, engines and gas turbines
  • Driver power range and equipment duty
  • Purchase cost, installation cost and life-cycle considerations
  • Speed and orientation considerations
  • Fuel and electrical-power availability
  • Site and environmental constraints
  • Emissions, noise and waste-heat considerations
  • Effects of hot and humid operating conditions
  • Space limitations
  • Matching equipment type to process duty and fluid properties
  • Integrating pump or compressor, driver, piping and control system
  • Selection and specification considerations
  • Reliability and maintainability
  • Distinguishing process problems from mechanical problems
  • Using operating data to diagnose poor performance
  • Pump-system troubleshooting exercises
  • Compressor-system troubleshooting exercises
  • Equipment and driver selection exercises
  • Integrated oil-and-gas facility case discussions
  • Course review and practical improvement planning

INSTRUCTOR

Instructor Profile

Instructor is a practicing chemical/process engineer with 45 years of industry experience and more than 20 years of professional technical-training experience. His career has focused primarily on oil and gas process and facilities engineering, including the design, operation, troubleshooting and optimization of gas-processing facilities, pipelines and associated production infrastructure.

He has worked for major owner/operators including Amoco and BP and for international engineering contractor Fluor, providing experience from both operating-company and engineering-design perspectives. His technical experience includes separation, compression, pumping, gas processing and conditioning, refrigeration, heat exchange, process control, pipelines, metering, water treatment, commissioning, troubleshooting and debottlenecking.

Instructor’s training approach is strongly practical and application-focused, drawing extensively on operating experience, engineering examples and case studies.

FAQ

DESIGNED FOR

The course is designed for:

  • Mechanical and rotating-equipment engineers
  • Facilities and process engineers
  • Maintenance and reliability engineers
  • Project and design engineers
  • Operations and production engineers
  • Senior operating and maintenance personnel
  • Field and maintenance supervisors
  • Technical personnel involved in equipment selection, specification, installation, testing or troubleshooting

It is particularly suitable for personnel who work with pumps and compressors as part of an operating facility and need to understand how process conditions, piping, controls and drivers affect equipment performance and reliability.

COURSE LEVEL

Intermediate

LEARNING OBJECTIVES

After completing this course, participants will be able to:

  • Apply basic fluid hydraulics to pump performance and operation.
  • Explain the difference between pressure and head and use system-head concepts when evaluating pumping systems.
  • Recognise the importance of suction conditions, cavitation and Net Positive Suction Head.
  • Interpret pump curves, system curves and operating points.
  • Compare centrifugal and positive-displacement pumps and identify suitable applications.
  • Explain the major differences between liquid pumping and gas compression.
  • Compare reciprocating, rotary and centrifugal compressors.
  • Interpret centrifugal-compressor performance maps and recognise surge, choke and other operating limits.
  • Explain the main centrifugal-compressor control methods and anti-surge protection.
  • Evaluate how suction pressure, suction temperature and gas properties affect compressor performance.
  • Compare electric motors, internal-combustion engines and gas turbines as equipment drivers.
  • Select appropriate pump, compressor and driver combinations for the process duty.
  • Recognise common operating and installation problems and develop practical troubleshooting approaches.
  • Understand the interaction between the machine, process, piping, driver and control system.
REGISTER

Registration is now OPEN!

Ph.D. students, group and early bird registrants are eligible to DISCOUNT!

For more details and registration please send email to: register@petro-teach.com

REQUEST IN HOUSE

Would you like a PetroTeach training course delivered at a time or location to suit you? 

click for request in house

Shopping cart
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Start typing to see products you are looking for.