COURSE SCHEDULE
| Code | Date | Location | price (€)* |
|---|---|---|---|
| PEE 111 | 17 - 19 Feb 2027 | Online | 2000 |
| PEE 111 | 5 - 7 Jul 2027 | Online | 2000 |
| PEE 111 | 19 - 21 Apr 2027 | Dubai | 2700 |
| PEE 111 | 15 - 17 Dec 2027 | Stavanger | 2700 |
* Prices are subject to VAT and local terms. Ph.D. students, groups (≥ 3 persons) and early bird registrants (8 weeks in advance) are entitled to a DISCOUNT!
COURSE OVERVIEW
This intensive, practical three-day course examines pumps and compressors used in oil and gas facilities, with emphasis on the engineering and operating decisions that affect equipment selection, installation, performance, control, reliability and troubleshooting. The course begins with liquid behaviour, hydraulics and pump-system fundamentals before progressing through centrifugal and positive-displacement pumps. It then develops the gas-property and thermodynamic foundations required to understand reciprocating, rotary and centrifugal compressors, including compressor performance, operating envelopes, control and anti-surge protection. The emphasis throughout is on understanding the complete system rather than treating the pump or compressor as an isolated machine. Worked calculations, performance curves, practical operating examples and troubleshooting discussions are used to show how fluid properties, process conditions, piping, and controls interact.
The course develops from liquid behaviour, hydraulics and centrifugal-pump fundamentals into positive-displacement pumps and the gas properties required to understand compressor behaviour. Participants then examine centrifugal compressors, performance maps, compressor controls and the effect of changing process conditions. Throughout the course, participants are encouraged to distinguish between equipment problems and process problems, recognise how apparently small changes in operating conditions can alter machine performance, and apply practical troubleshooting methods to real operating situations.
Participants will become familiar with:
o Liquid properties and pump-system hydraulics
o Centrifugal and positive-displacement pumps
o Pump curves, system curves and operating points
o NPSH and cavitation
o Pump selection and application
o Gas properties and compressor fundamentals
o Reciprocating, rotary and centrifugal compressors
o Compressor performance maps and operating envelopes
o Compressor control and anti-surge protection
o Effects of process conditions on compressor performance
COURSE OUTLINE
5 days
Day 1: Liquid Behaviour, Hydraulics and Centrifugal Pumps
o Relationship between pumps, liquids and the piping system
o Density, relative density, viscosity, temperature and vapour pressure
o Flowrate, area and velocity relationships
o Pressure, velocity and elevation as forms of hydraulic energy
o Difference between pressure and head
o Hydraulic power and equipment efficiency
o Cavitation and vapour lock
o Net Positive Suction Head: NPSHA and NPSHR
o Practical methods for improving pump suction conditions
o Centrifugal-pump operating principles
o Radial, mixed-flow and axial-flow pumps
o Vertical, in-line and multistage arrangements
o Major pump components
o Pump curves and system curves
o Determining the operating point
o Effects of impeller diameter and operating speed
o Series and parallel pump operation
o Best-efficiency-point considerations
o Pump selection, installation and piping considerations
o Operating problems, maintenance considerations and troubleshooting
Day 2: Positive-Displacement Pumps and Compressor Fundamentals
o Positive-displacement pumping principles
o Pump displacement, slip and efficiency
o Reciprocating piston, plunger and diaphragm pumps
o Rotary gear, lobe, vane and screw pumps
o Flow characteristics and pressure capability
o Pump application and selection considerations
o Pulsation and vibration
o Blocked-discharge and overpressure risks
o Installation, maintenance and troubleshooting
o Differences between pumping liquids and compressing gases
o Gas pressure, temperature, density and enthalpy
o Thermodynamic behaviour of gases
o Compressor terminology and classification
o Positive-displacement versus dynamic compressors
o Reciprocating-compressor operating principles
o Cylinders, valves, clearance and rod load
o Rotary screw, lobe, liquid-ring and sliding-vane compressors
o Compressor lubrication and auxiliary systems
o Compressor application and initial selection considerations
Day 3: Centrifugal Compressors, Controls and Process Effects
o Centrifugal-compressor operating principles
o Major compressor components
o Compressor trains, stages and casing arrangements
o Intercooling
o Compressor performance maps
o Head and capacity relationships
o Effects of suction conditions and gas properties
o Series and parallel compressor operation
o Surge
o Choke or stonewall
o Compressor operating envelope
o Installation, piping and operating considerations
o Objectives of compressor control and protection
o Discharge-throttle and suction-throttle control
o Speed control
o Inlet-guide-vane control
o Recycle control
o Anti-surge protection
o Surge line, control line and safety margin
o Control-system and valve response
o Effects of suction pressure and temperature
o Effects of gas density and molecular properties
o Relationships between pressure, temperature, enthalpy and compressor power
o Worked compressor-performance calculations
o Troubleshooting changing compressor performance
o Course review and practical improvement planning
INSTRUCTOR
Petro Teach Instructor
The Instructor is a chemical/process engineer with 45 years of industry experience and more than 20 years of professional technical-training experience. His career has focused primarily on oil and gas process and facilities engineering, including the design, operation, troubleshooting and optimisation of gas-processing facilities, pipelines and associated production infrastructure. He has worked for major owner/operators including Amoco and BP and for international engineering contractor Fluor, providing experience from both operating-company and engineering-design perspectives. His technical experience includes separation, compression, pumping, gas processing and conditioning, refrigeration, heat exchange, process control, pipelines, metering, water treatment, commissioning, troubleshooting and debottlenecking. His training approach is strongly practical and application-focused, drawing extensively on operating experience, engineering examples and case studies.
FAQ
DESIGNED FOR
The course is designed for:
o Mechanical and rotating-equipment engineers
o Facilities and process engineers
o Maintenance and reliability engineers
o Project and design engineers
o Operations and production engineers
o Senior operating and maintenance personnel
o Field and maintenance supervisors
o Technical personnel involved in equipment selection, specification, installation, testing or troubleshooting
It is particularly suitable for personnel who work with pumps and compressors as part of an operating facility and need to understand how process conditions, piping, and controls affect equipment performance and reliability.
COURSE LEVEL
Intermediate
LEARNING OBJECTIVES
After completing this course, participants will be able to:
o Apply basic fluid hydraulics to pump performance and operation.
o Explain the difference between pressure and head and use system-head concepts when evaluating pumping systems.
o Recognise the importance of suction conditions, cavitation and Net Positive Suction Head.
o Interpret pump curves, system curves and operating points.
o Compare centrifugal and positive-displacement pumps and identify suitable applications.
o Explain the major differences between liquid pumping and gas compression.
o Compare reciprocating, rotary and centrifugal compressors.
o Interpret centrifugal-compressor performance maps and recognise surge, choke and other operating limits.
o Explain the main centrifugal-compressor control methods and anti-surge protection.
o Evaluate how suction pressure, suction temperature and gas properties affect compressor performance.
REGISTER
Registration is now OPEN!
* Prices are subject to VAT and local terms. Ph.D. students, groups (≥ 3 persons) and early bird registrants (8 weeks in advance) are entitled to a DISCOUNT!
For more details and registration please send email to: register@petro-teach.com
REQUEST IN HOUSE
Would you like a PetroTeach training course delivered at a time or location to suit you?
click for request in house