COURSE SCHEDULE
| Code | Date | Location | price (€)* |
|---|---|---|---|
| PPE 303 | 4 - 8 Jun 2027 | Online | 3300 |
| PPE 303 | 5 - 9 Jul 2027 | Online | 3300 |
| PPE 303 | 21 - 25 Jun 2027 | Istanbul | 4400 |
| PPE 303 | 6 - 10 Sep 2027 | Bangkok | 4400 |
COURSE OVERVIEW
This practical course explains how liquid and gas piping systems work in oil and gas facilities. Participants connect fluid behaviour, pressure loss, piping components and utility services with safe, reliable layouts and day-to-day operating decisions. Examples, short calculations, drawing reviews and group exercises cover process liquids, hydrocarbon gas, compressed air, nitrogen and steam. The course builds confidence in recognising piping problems and communicating with specialist designers without requiring prior ASME B31.3 design experience. This five-day foundation course follows a piping system from fluid behaviour and service definition through component choice, sizing, drawings, layout and operation. Liquid and compressible-fluid examples are developed side by side so participants can see why the same arrangement does not suit every service.
The course includes hydrocarbon liquids and gas together with the compressed-air, nitrogen and steam utilities commonly found in oil and gas facilities. It introduces relevant codes and pressure ratings as context, while detailed wall-thickness design, piping-class development, stress analysis and code acceptance rules belong in the separate ASME B31.3 course.
Short exercises are spread across all five days, including pressure-drop estimates, component and valve selection, P&ID interpretation, layout review and a final integrated piping-system discussion.
In summary, Participants will become familiar with the following:
- Liquid and gas properties, velocity, pressure loss and basic sizing
- Pipe materials, fittings, flanges, valves and pressure-rating awareness
- Compressed air, nitrogen, steam and hydrocarbon gas piping
- Drawings, instrumentation, equipment connections and practical layout
- Supports, thermal movement, insulation, testing and maintainability
- Safety, common failures and practical system-review exercises
COURSE OUTLINE
5 days
Day 1: Fluid Behaviour, Safety and Pipe Sizing
- Oil and gas facility piping services and the role of process and utility systems
- Density, viscosity, vapour pressure, gas compressibility and phase behaviour
- Velocity, friction, fittings and pressure-drop principles for liquid lines
- Gas pressure loss, expansion, Joule-Thomson cooling and choked-flow awareness
- Leaks, hazardous fluids, isolation, draining, venting and stored energy
- Exercise: compare liquid and gas pipe-sizing choices for a simple facility
Day 2: Pipe Components, Materials and Valves
- Pipe dimensions, schedules, material families and service suitability
- Fittings, branches, flanges, gaskets, bolting and joining methods
- Pressure-temperature ratings, piping specifications and code orientation
- Isolation, check, control and relief-valve functions and common applications
- Cavitation, flashing, gas choking, leakage and valve installation issues
- Exercise: select components and valve types for contrasting services
Day 3: Gas Piping and Utility Systems
- Compressed air: moisture, dew point, treatment, receivers and distribution
- Nitrogen: generation or storage, manifolds, blanketing and asphyxiation hazards
- Steam: condensate, trapping, drainage, expansion and water-hammer prevention
- Hydrocarbon gas piping: practical considerations for sizing, materials, valves and layout
- Orifices, restrictions, vents, drains and utility tie-ins
- Exercise: identify operating faults in a utility distribution sketch
Day 4: Drawings, Instruments and Piping Layout
- Read PFDs, P&IDs, line lists, plans and piping isometrics
- Flow, pressure and temperature measurement and installation needs
- Pump suction and discharge piping and equipment access
- Valve access, high and low points, slopes, dead legs and maintainability
- Pipe racks, segregation, hazardous areas and offshore space constraints
- Exercise: review and improve a simplified equipment-area layout
Day 5: Supports, Integrity and Integrated System Review
- Supports, guides, anchors and load paths at a practical level
- Thermal expansion, vibration and when specialist stress review is needed
- Insulation, heat tracing, corrosion and external protection
- Fabrication, inspection, pressure testing and commissioning awareness
- Common problems: leaks, erosion, poor drainage and inaccessible equipment
- Integrated exercise: review a liquid and gas piping package for safety and operability
- Group discussion of findings, priorities and specialist referrals
- Course review and application planning
INSTRUCTOR
Instructor Profile
Instructor is a practicing chemical/process engineer with 45 years of industry experience and more than 20 years of professional technical-training experience. His career has focused primarily on oil and gas process and facilities engineering, including the design, operation, troubleshooting and optimization of gas-processing facilities, pipelines and associated production infrastructure.
He has worked for major owner/operators including Amoco and BP and for international engineering contractor Fluor, providing experience from both operating-company and engineering-design perspectives. His technical experience includes separation, compression, pumping, gas processing and conditioning, refrigeration, heat exchange, process control, pipelines, metering, water treatment, commissioning, troubleshooting and debottlenecking.
Instructor’s training approach is strongly practical and application-focused, drawing extensively on operating experience, engineering examples and case studies.
FAQ
DESIGNED FOR
Early-career process, mechanical, piping, facilities, production and operations engineers, CAD designers, supervisors and technical personnel who work with oil and gas piping systems.
Participants should be familiar with basic plant equipment and engineering units. It is suitable for personnel who need a broad understanding of piping before taking responsibility for detailed process-piping design or a code-focused course.
COURSE LEVEL
- Intermediate
LEARNING OBJECTIVES
After completing this course, participants will be able to:
- Distinguish liquid, gas and steam behaviour and explain how pressure, temperature and fluid properties affect piping performance.
- Estimate flow velocity and pressure loss and identify practical pipe-sizing trade-offs.
- Recognise common pipe materials, fittings, flanges, valves and their applications and limitations.
- Interpret PFDs, P&IDs, line information and isometrics at a foundation level.
- Identify sound arrangements for pumps, gas lines, utilities, valves, instruments, vents and drains.
- Explain the purpose of supports, flexibility, insulation, heat tracing, testing and inspection.
- Recognise common safety and operability problems and propose practical first steps for investigation.
REGISTER
Registration is now OPEN!
Ph.D. students, group and early bird registrants are eligible to DISCOUNT!
For more details and registration please send email to: register@petro-teach.com
REQUEST IN HOUSE
Would you like a PetroTeach training course delivered at a time or location to suit you?
click for request in house